Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Business and sellers

Dimensional weight calculator

Enter the size and actual weight of a parcel, pick a carrier rule or type your own divisor, and see the dimensional weight, the billable weight and the working. Rounding is only applied where you tick it.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

The parcel
Carrier rule: change any to match yours
A volume in the divisor's units; 0 = always.
Result

Billable weight 22 lbDimensional weight 22 lb is higher than the actual weight 4 lb

  • = 9.98 kg
  • Dimensional weight is billed
Sides used
20 × 15 × 10 in
Volume
3,000 in³
Divisor
139 in³ per lb
Dimensional weight
22 lb
Actual weight
4 lb
Billable weight
22 lb

Formula: dimensional weight = length × width × height ÷ divisor. Billable weight = the greater of the actual weight and the dimensional weight, and dimensional weight is used only when the volume is above 1,728 in³. Rounding is applied only where a box is ticked.

Your numbers: 20 × 15 × 10 = 3,000 in³; 3,000 ÷ 139 = 21.583 lb, rounded up to 22 lb; the greater of 22 and 4 is 22 lb.

Divisors as of 19 Nov 2026, from USPS Postal Explorer (Priority Mail), UPS, Canada Post and Australia Post. FedEx, DHL and other carriers are not preset: type the divisor from their guide or your contract. Carriers change their rules, so check your carrier's own page.

How to use the Dimensional Weight Calculator

  1. Type the Length, Width and Height, choose the Size unit, then enter the Actual weight and its Weight unit.
  2. Pick the Carrier and service. The Divisor, its unit, the volume limit and the rounding boxes fill in. For another carrier choose "Another carrier" and type your own divisor.
  3. Tick or untick the rounding boxes to match your carrier's rule.
  4. Read the billable weight, the dimensional and actual weights, the formula and your numbers under Result.

What is dimensional weight and how is it calculated?

Dimensional weight, also called volumetric weight, prices a parcel by the space it takes as well as by what it weighs. The carrier multiplies length × width × height and divides by a divisor to turn that volume into a weight, and then bills the greater of the dimensional weight and the actual weight. A light but bulky box is billed as if it were heavy.

A box of 20 × 15 × 10 inches has a volume of 3,000 cubic inches. Divided by 139, the divisor on the USPS Priority Mail page, that is 21.58, which that page rounds up to 22 pounds. If the box actually weighs 4 pounds, you are billed for 22. The same box in centimeters is 50.8 × 38.1 × 25.4 cm: the calculator converts between units for you, so the divisor can be in inches and pounds or in centimeters and kilograms whatever units you type.

The divisor is the number that matters. A bigger divisor means a smaller dimensional weight, so the same parcel has a lower dimensional weight at 6,000 than at 5,000. A 100 × 60 × 20 cm parcel is 120,000 cm³, which is 24 kg at 5,000 and 20 kg at 6,000.

What divisor do UPS, FedEx and DHL use?

This calculator presets only the divisors that were read on a carrier's own page, so it does not guess. The pages read on 19 Nov 2026 give these figures. UPS: dimensional weight is (length × width × height) ÷ a divisor, in inches; each measurement is rounded up to the nearest whole inch (1.01 to 1.99 becomes 2), any fraction of the result goes up to the next whole pound, and the divisor is 139 for Daily Rates and 166 for Retail Rates. USPS Priority Mail retail parcels: 139 for cubic inches and pounds, applied to parcels over 1 cubic foot (1,728 cubic inches), with each side rounded up to a whole inch, the result rounded up to the next whole pound, and a factor of 0.785 for parcels that are not boxes. Above 70 pounds, the price of 70 pounds applies. Canada Post: 5,000 cm³ per kg (139 in³ per lb) for Priority, Xpresspost, Expedited and U.S. and international services (except Tracked Packet and Small Packet), and 6,000 cm³ per kg (166 in³ per lb) for Regular Parcel. Australia Post: a cubic conversion factor of 250 kg per cubic meter, which is 4,000 cm³ per kg.

The pages for FedEx and DHL could not be opened here, so they are not preset and no figure is stated for them. Take the divisor from the carrier's own guide, your rate card or your contract, choose Another carrier, and type it in with its unit. The same goes for any UPS service or country that the UPS page does not cover. Divisors can differ by service and by year, so check the one your shipment will use.

Is dimensional or actual weight used for billing?

The usual rule is the greater of the two. The USPS page bases Priority Mail postage on the greater of actual and dimensional weight, but only for parcels over 1,728 cubic inches: below that, the actual weight is used, and the calculator shows that case. Australia Post generally bases postage on the greater of physical and cubic weight, and says cubic charging generally does not apply to parcels under 1 kg for non-contract lodgements, though it may still apply to large, irregular or cylindrical ones. Flat-rate packaging is priced by the package selected.

Canada Post's page explains how to work out the volumetric equivalent but does not spell out the billing rule, and it states no rounding rule. The calculator shows the greater of the two weights because that is the common method; confirm it in the carrier's guide. Rounding is off unless you tick it, so a carrier that does not state a rounding rule is not rounded by this tool.

How do I reduce dimensional weight?

Cut the volume, because that is what the divisor sees. Use the smallest box that protects the item, trim extra packing, and consider a padded mailer for soft goods. Measure the packed parcel at its largest points, since carriers measure the outside of the package, and watch rounding: where a carrier rounds each side up, a side of 12.2 inches counts as 13, and a box of 13 × 13 × 13 is 2,197 cubic inches against 1,816 for 12.2 on each side.

Dimensional weight is a parcel rule. Air and sea freight have their own conversion rules that this tool does not cover, so use your forwarder's figures there. Results are estimates and not shipping advice. Check your carrier's own page or contract before you ship. This tool is not affiliated with any carrier.

Use it with

Questions

What is dimensional weight and how is it calculated?

It converts a parcel's volume to a weight: length × width × height ÷ divisor. The carrier bills the greater of that and the actual weight. A 20 × 15 × 10 in box is 3,000 in³; at 139 that is 21.58 lb.

What divisor do UPS, FedEx and DHL use?

UPS's page gives 139 for Daily Rates and 166 for Retail Rates (inches and pounds), rounding each side up to a whole inch and any fraction of a pound up. FedEx and DHL pages could not be opened, so no figure is stated for them: choose Another carrier and type the divisor from the carrier's guide or your contract. USPS Priority Mail (139), Canada Post (5000 or 6000 cm³/kg) and Australia Post (250 kg/m³) are also preset.

Is dimensional or actual weight used for billing?

Generally the greater of the two. USPS applies the rule to Priority Mail parcels over 1,728 cubic inches only; below that the actual weight is used.

How do I reduce dimensional weight?

Use a smaller box or a padded mailer and trim packing. Where a carrier rounds each side up, shaving a side just under a whole unit helps.

Does dimensional weight apply to air and sea freight?

Freight uses its own conversion rules, which this parcel calculator does not cover. Use the figures from your forwarder.

How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.