Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Unit and size converters

Download time calculator

Type the file size and the connection speed, in the units each is quoted in, and see how long the download takes.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

Mbps is megabits per second and MB/s is megabytes per second. Internet plans use Mbps, file sizes use bytes, and one byte is 8 bits.
Share of the line speed lost to protocol headers, retransmits and busy servers. Type 0 for the ideal time.
Result

1 h 14 min 4 s50 GB at 100 Mbps, with 10% overhead

  • 100 Mbps = 12.5 MB/s
  • Usable: 90 Mbps = 11.25 MB/s
  • 50 GB of data
Time, with 10% overhead
1 h 14 min 4 s
Time, ideal (no overhead)
1 h 6 min 40 s
Total seconds
4,444 s
File size in bits
400 billion bits
Same file atTime (10% overhead)
10 Mbps = 1.25 MB/s12 h 20 min 44 s
25 Mbps = 3.125 MB/s4 h 56 min 18 s
50 Mbps = 6.25 MB/s2 h 28 min 9 s
100 Mbps = 12.5 MB/s1 h 14 min 4 s
250 Mbps = 31.25 MB/s29 min 38 s
500 Mbps = 62.5 MB/s14 min 49 s
1 Gbps = 125 MB/s7 min 24 s

Formula: time = file size in bits ÷ usable speed in bits per second. Bits = bytes × 8, and usable speed = speed × (1 − overhead ÷ 100).

Your numbers: 50 GB = 50,000,000,000 bytes × 8 = 400 billion bits; 100 Mbps = 100 Mbps, × (1 − 10 ÷ 100) = 90 Mbps; 400 billion bits ÷ 90 Mbps = 4,444 s = 1 h 14 min 4 s.

A small b is a bit and a capital B is a byte: a 100 Mbps connection moves at most 12.5 MB/s. Real downloads are usually a little slower than the line speed because of protocol overhead, the server and the network in between, so treat the answer as an estimate.

How to use the Download Time Calculator

  1. Type the File size and choose its unit, such as GB or MB.
  2. Type the Connection speed and choose its unit. Plans are usually in Mbps, while downloads often show MB/s.
  3. Set the Overhead %, or type 0 for the ideal time.
  4. Read the time under Result, with the ideal time, the speed in MB/s and the same file at other speeds.

How long does it take to download a file at a given speed?

Convert both numbers to bits and divide: time = file size in bits ÷ speed in bits per second. A byte is 8 bits, so a 50 GB file is 50 × 10⁹ × 8 = 4 × 10¹¹ bits. On a 100 Mbps connection, which moves 100 × 10⁶ bits every second, that takes 4 × 10¹¹ ÷ 10⁸ = 4,000 seconds, which is 1 hour 6 minutes 40 seconds if the line is used perfectly.

The tool does the conversions for you, whatever mix of units you type: a size in MB or GiB with a speed in kbps, Mbps, Gbps or MB/s. It prints the working with your own numbers under the result, and a table shows the same file at 10 Mbps, 25 Mbps, 50 Mbps, 100 Mbps, 250 Mbps, 500 Mbps and 1 Gbps. With 10% overhead the 50 GB file takes 1 h 14 min 4 s at 100 Mbps, 4 h 56 min 18 s at 25 Mbps and 7 min 24 s at 1 Gbps.

What is the difference between Mbps and MB/s?

A lowercase b means bits and a capital B means bytes, and there are 8 bits in a byte. Mbps is megabits per second, the unit internet plans are sold in, and MB/s is megabytes per second, the unit many download managers and game launchers show. To go from one to the other, divide megabits by 8: 100 Mbps is 12.5 MB/s, and 8 MB/s is 64 Mbps. Mixing them up is the most common reason a download seems eight times slower than the plan.

The prefixes have two meanings. The SI prefixes kilo, mega and giga count in thousands, so 1 MB is 1,000,000 bytes and 1 GB is 1,000,000,000 bytes. The binary prefixes kibi, mebi and gibi count in 1,024s, so 1 MiB is 1,048,576 bytes and 1 GiB is 1,073,741,824 bytes, about 7% more than a decimal GB. Network speeds use the decimal prefixes. Some programs show sizes counted in 1,024s but label them MB or GB, so if a size came from one of those, choose the binary unit. For 1 GiB on a 1 Gbps line the time is 8.59 seconds, against 8 seconds for 1 GB.

Why is my real download slower than my plan speed?

The plan speed is the rate the line can carry bits, but not every bit is file data. Each packet carries headers, lost packets are sent again, and the server, the Wi-Fi link and other devices on your network may be slower than your line. The Overhead % box takes that share off the speed: with 10% the usable speed on a 100 Mbps line is 90 Mbps, or 11.25 MB/s. The 10% it starts with is an example, not a measurement, and your own result may be better or worse.

This calculator does not test your connection. If you want a realistic answer, run a speed test, type the download speed it reports as the connection speed, and set the overhead to 0 or to a small figure. Both times are shown under the result, the ideal one and the one with overhead, so you can see the range.

Use it with

Questions

How long does it take to download 1 GB at 100 Mbps?

1 GB is 8 × 10⁹ bits, and 100 Mbps is 10⁸ bits a second, so it takes 80 seconds in the ideal case, or about 89 seconds with 10% overhead.

How do I convert Mbps to MB/s?

Divide by 8. A 100 Mbps connection moves at most 12.5 MB/s, and 1 Gbps is 125 MB/s.

How long does it take to download a 50 GB game?

At 100 Mbps it takes 1 h 6 min 40 s if the line is fully used and about 1 h 14 min with 10% overhead. At 1 Gbps the same file takes about 7 minutes.

What is the difference between MB and MiB?

A megabyte (MB) is 1,000,000 bytes and a mebibyte (MiB) is 1,048,576 bytes. The same goes for GB and GiB. The tool offers both so that you can match the unit your file size is shown in.

What overhead should I use?

There is no single figure. The tool starts with 10% as an example. Use 0 for the ideal time, or take a speed test result and set a small overhead to match.

How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.