Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Math and study

Final grade calculator

Find the score you need on the final exam for the course grade you want, with the formula shown for your numbers.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

Current grade is your grade from everything before the final. Final worth is its share of the course grade. Change the top score only if extra credit lets you pass 100. The numbers shown are examples: type your own.

Result

96%needed on the final exam to finish the course with 90%

  • Target reachable
  • Final worth 25%
  • Current grade 88%
With 100% on the final
91%
With 0% on the final
66%
To 4 decimals
96%

Formula: Score needed = (target − current × (1 − weight ÷ 100)) ÷ (weight ÷ 100)

Your numbers: (90 − 88 × (1 − 0.25)) ÷ 0.25 = 96

Needed for other letter grades

Course grade you wantNeeded on the final
A (90%)96%
B (80%)56%
C (70%)16%
D (60%)Already safe

Example cut-offs only. Your school may use different ones.

Same target if the final were worth more or less

Final worth 10%
Not possible
Final worth 20%
98%
Final worth 30%
94.67%
Final worth 40%
93%

How to use the Final Grade Calculator

  1. Type your Current grade %: the grade you have from everything before the final.
  2. Type Final worth %, the share of the course grade the final counts for, and Grade you want %.
  3. Leave Top score on final % at 100 unless your teacher allows extra credit on the exam.
  4. Read the score you need under Result, then check the table for other letter grades and the weights below it.

How do I calculate what I need on the final exam?

Your course grade is a weighted sum of two parts: everything before the final, and the final itself. If the final counts for a share w of the course, then course grade = current × (1 − w) + final score × w. To get the score you need, solve that for the final score: needed = (target − current × (1 − w)) ÷ w. Write w as a fraction: a final worth 25% is 0.25.

Take the numbers the tool starts with: a current grade of 88%, a final worth 25% and a target of 90%. The earlier work contributes 88 × 0.75 = 66 points toward the course grade. You are 24 points short of 90, and the final supplies only 0.25 of its score, so you need 24 ÷ 0.25 = 96% on the final. The "Your numbers" line under the answer shows this same sum for whatever you type.

A second example that does not come out even: current 82%, final worth 30%, target 80%. The earlier work gives 82 × 0.7 = 57.4, the gap is 22.6, and 22.6 ÷ 0.3 = 75.33% on the final. The tool shows two decimals and keeps more inside, so rounding never builds up.

What do I need on the final to get an A or a B?

Type the percentage your syllabus gives for the letter you want as the target. The table below uses 90% for an A as an example only: schools and teachers set their own cut-offs. It shows the score needed on the final for a 90% course grade, for common current grades and final weights. "Not possible" means more than 100% would be needed.

For a B at 80% the same sum applies. With 76% now and a final worth 40% you need 86%: the earlier work gives 76 × 0.6 = 45.6, and the gap of 34.4 is split over a weight of 0.4.

Score needed on the final for a 90% course grade
Current gradeFinal worth 10%Final worth 20%Final worth 25%Final worth 30%Final worth 40%Final worth 50%
80%Not possibleNot possibleNot possibleNot possibleNot possible100%
84%Not possibleNot possibleNot possibleNot possible99%96%
86%Not possibleNot possibleNot possible99.33%96%94%
88%Not possible98%96%94.67%93%92%
90%90%90%90%90%90%90%
92%72%82%84%85.33%87%88%
95%45%70%75%78.33%82.5%85%

Read across a row to see how the weight matters. Below your target, a heavier final asks for less: at 86% now, a 10% final needs 126% (out of reach) but a 50% final needs 94%. Above the target, the opposite holds: a heavier final puts more of the grade at risk, so 95% now needs 70% with a 20% final and 85% with a 50% one. At 100% weight the earlier work no longer counts and the answer is the target itself.

To read your own result, compare the score needed with what you usually score on exams. A needed score near your average is a fair goal. One far above it tells you to talk to your teacher about extra credit or to aim for a lower letter. The result is exact for the weights you type, but your syllabus decides which weight is right.

The tool also shows your own current grade against A, B, C and D targets and against 10, 20, 30 and 40% weights, so you do not need to change the inputs to compare them.

What if I am already safe, or the target is out of reach?

Two special results can appear. Already safe means that even a 0 on the final leaves your course grade at or above the target. With a current grade of 95%, a final worth 40% and a 90% target you need 82.5%, but with the final worth 20% you need 70%: the heavier the final, the more it can pull a good grade down. At 95%, a 10% final and an 80% target you are safe, because 95 × 0.9 = 85.5 is already above 80.

Out of reach means the score you need is above the top score the final allows. Current 70%, final worth 20% and target 90% needs 170%, so the best you can do is 70 × 0.8 + 100 × 0.2 = 76%. If your teacher offers extra credit on the exam, raise Top score on final % and the tool shows whether the target becomes possible.

Can I still pass if I fail the final?

Passing usually depends on the course grade, so set your pass mark as the target. With a current grade of 62%, a final worth 30% and a pass mark of 60%, you need 55.33% on the final. Some courses also demand a minimum score on the exam itself, and that rule is separate from this sum. Check your syllabus for it.

The current grade must be one percentage that covers all the non-final work. If your marks are split into categories such as homework, quizzes and a midterm, first combine them in the weighted grade calculator, then type that result here. If you track points, use the GPA calculator to see what the final course grade means for your average. Leave out any category you have not been graded on yet.

The tool does the sum as written in your syllabus. It does not know your school's rounding rule, dropped lowest scores or curve, so treat the result as an estimate and confirm with your teacher.

Use it with

Questions

What do I need on the final to get an A?

Use the formula needed = (target − current × (1 − w)) ÷ w, where w is the final's share of the course as a fraction. With 88% now, a final worth 25% and an A at 90%, you need 96%.

How do I calculate my final grade?

Multiply your grade before the final by (1 − w), add the final score times w, where w is the final's weight as a fraction. An 88% before a final worth 25%, plus 96% on the final, gives 88 × 0.75 + 96 × 0.25 = 90%.

What if I need more than 100% on the final?

Then the target is out of reach with the exam alone. The tool shows the highest course grade you can still finish with. If extra credit is allowed on the final, enter the higher top score and it recalculates.

Can I still pass if I fail the final?

Sometimes. Set your pass mark as the target: if the answer is below the score you expect, or the tool says already safe, you can. Some courses also require a minimum exam score, so read the syllabus.

What do I need on the final to keep my grade?

Type your current grade as the target. With 88% now and a final worth 25%, you need 88% on the final to stay at 88%. A final score above your current grade raises the course grade, a lower one pulls it down.

Does this work with points instead of percentages?

Yes, if you convert to percentages first. Divide your points by the total points available so far and multiply by 100 to get the current grade, and use the final's share of the course as its weight.

How this page was made: the tool's results are computed in your browser by the code on this page; the explanations were drafted with AI help and checked against the tool's own output.