Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Math and study

Percentage change calculator

Find the percent increase or decrease between two numbers, see the percent that takes you back, compare two rates in percentage points, or paste a whole series and get every step plus the average change per period.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

What are you comparing?
Change from 80 to 100

+25%Increase of 20, from 80 to 100

  • Increase
  • New = 1.25 × old
  • Back: -20%
Old value
80
New value
100
Difference
+20
Percent change
+25%
To go back
-20%
Multiplier
1.25

In words: From 80 to 100 is an increase of 25% (20 more).

Formula: change = (new − old) ÷ |old| × 100

Your numbers: (100 − 80) ÷ 80 × 100 = 20 ÷ 80 × 100 = 25%

The way back: to return from 100 to 80 you need a fall of 20%, because the base is now 100.

If both numbers are themselves rates, such as 4% and 6%, use Two rates (points): the gap between rates is in percentage points.

How to use the Percentage Change Calculator

  1. Choose Two values, Two rates (points) or A series of values under What are you comparing?
  2. For two values, type the Old value and the New value. For rates, type the Old rate (%) and the New rate (%). For a series, list the values oldest first.
  3. Read the big figure, then the chips and the cards: difference, the percent that goes back, the multiplier, and for a series each step and the compound average.
  4. Use Copy the sentence to paste the result in words into a report or message.

How do I calculate a percentage increase or decrease?

Take the new value, subtract the old one, divide by the old one and multiply by 100. The old value is the base because it is where you started. From 80 to 100 the gap is 20, and 20 divided by 80 is 0.25, so the change is +25%. A positive answer is an increase and a negative one is a decrease; zero means nothing moved. The calculator writes the result as a sentence, such as "an increase of 25% (20 more)", so you can see which direction it found.

If the old value is negative, the calculator divides by its size, so a move from −50 to −25 reads as +50%, which matches the direction of the move. If the old value is zero the percent is undefined, because no percent of zero reaches a positive number. In that case the page says so instead of returning a huge or infinite figure, and the plain difference is the honest comparison.

Why does the way back not equal the same percent?

A rise and the fall that undoes it use different bases. After a 25% rise from 80 to 100, the fall back to 80 is measured against 100, so it is only 20%. The card To go back and the chip beside the answer give that second percent. The table below runs several pairs through the same functions as the calculator, so you can see the pattern: the bigger the rise, the further the return percent is from the first one, and a doubling (+100%) needs a 50% fall to return.

Percent change and the percent that goes back
OldNewPercent changeTo go backNew ÷ old
507550%-33.3333%1.5
7550-33.3333%50%0.6667
10015050%-33.3333%1.5
150100-33.3333%50%0.6667
4030-25%33.3333%0.75
304033.3333%-25%1.3333
2002000%0%1

The same effect explains why a loss of 50% needs a gain of 100% to recover. The multiplier column shows it directly: a change is just the multiplier minus one, written as a percent. Chaining changes means multiplying multipliers, not adding percents.

What is the difference between percentage points and percent?

When both numbers are rates, there are two honest ways to describe the gap. A rate that moves from 4% to 6% has gone up by 2 percentage points, which is a plain subtraction. Measured against its old value it has gone up by 50%, because 2 divided by 4 is one half. Headlines mix the two up all the time, and the mistake changes the story. Two rates (points) shows both, plus the points and the relative change needed to go back (−2 points, or −33.3333% relative).

Use points when you want to say how far two rates are from each other, for example an interest rate or a survey share. Use the relative percent when you want to say how large the shift is compared with where the rate was. If the old rate is zero the relative change is undefined, and only the points figure is shown.

How do I find the change over several periods?

Paste the values in order, oldest first, and choose A series of values. For 100, 120, 90 and 135 the three steps are 20%, -25%, 50%. The total change from the first value to the last is 35%. Because each step has a different base, the simple mean of the step percents (15%) is not the average growth. The compound average is the one that, applied the same way every period, ends at the same place: the last value divided by the first, raised to one over the number of steps, minus one. Here that is 10.5209% per step, and 100 grown by that rate three times gives 135.

This is the same geometric mean that lies behind a compound annual growth rate. When your periods are years and you need the rate for a dated range, the CAGR calculator does that with start and end dates. For a single X% of Y or an add-or-subtract percent, the general percentage calculator is a better fit. The compound average needs the first and last values to share a sign, and a zero in the middle gives "n/a" for the steps next to it, since a percent of zero is undefined.

Use it with

Questions

What is the formula for percent change?

Percent change = (new − old) ÷ |old| × 100. From 80 to 100 that is (100 − 80) ÷ 80 × 100 = +25%.

Why is my percent change negative?

A negative result means the new value is lower than the old one: a decrease. From 100 to 80 the change is −20%.

What is the difference between percent and percentage points?

Percentage points subtract two rates (6% − 4% = 2 points). Percent divides that gap by the old rate (2 ÷ 4 = +50%). They answer different questions.

How do I find the percent that reverses a change?

Measure the way back against the new value: (old − new) ÷ |new| × 100. After +25% from 80 to 100, the way back is −20%. The calculator shows it as To go back.

What if the old value is zero?

The percent change is undefined, because dividing by zero has no meaning. The calculator tells you so and does not show an infinite number.

How do I get the average change per period?

Use the compound average: (last ÷ first)^(1 ÷ steps) − 1. For 100, 120, 90, 135 it is +10.5209% per step, not the simple mean of +15%.

How this page was made: the tool's results are computed in your browser by the code on this page; the explanations were drafted with AI help and checked against the tool's own output.