Free tool · Generators
Wi-Fi QR code generator
Enter your network name and password and get a QR code that guests can scan to join. Print it as a card, or download it as SVG or PNG. Your password stays in your browser.
- Free
- No sign-up
- Runs in your browser
Guest Wi-Fi
Network Maple House
Password
Hidden network
Scan with your phone camera to join.
- Level M
- Contrast 21:1
- Version
- 3 of 40
- Modules
- 29 × 29
- Data
- 43 bytes
- PNG size
- 481 × 481 px
- Size note
- Small code: easy to scan even when printed small.
Text inside the code (anyone who scans it can read the password):
WIFI:T:WPA;S:Maple House;P:pine-lake-7421;;
How to use the Wi-Fi QR Code Generator
- Type the Network name (SSID) and the Password, exactly as your router shows them.
- Choose the Security type. Tick Hidden network if the name is not broadcast. Pick No password for an open network.
- Set a Card title if you want to print the card. Tick Show the password on the card only if you want it written in plain text too.
- Press Print card, or Download SVG or Download PNG. Test the finished code with a phone before you share it.
How do I make a QR code for my Wi-Fi?
A Wi-Fi QR code is an ordinary QR code that holds one line of text in a set format. The ZXing project documents it as WIFI:T:WPA;S:mynetwork;P:mypass;;: T is the security type, S the network name and P the password, and the line ends with two semicolons. The example on this page, a WPA network called Maple House, becomes WIFI:T:WPA;S:Maple House;P:pine-lake-7421;;. The line is shown under the card so you can see exactly what the code contains.
Five characters have a meaning in the format, so they must carry a backslash when they appear in a name or password: the backslash itself, the semicolon, the comma, the double quote and the colon. A network called My;Net is written S:My\;Net. The tool adds these backslashes for you. It also tells you when it did, so a long password with symbols does not turn into a mystery.
The ZXing wiki adds one more rule: a name or password made only of hex digits, such as 1234 or cafe1234, should be wrapped in double quotes so a reader does not take it for a hex string. This tool leaves such values alone unless you tick Quote hex-looking values, and it shows a hint when your name or password has that shape.
How do guests scan it, and is it safe to share a password this way?
Guests point the phone camera, or a QR scanner app, at the code. A phone that understands the Wi-Fi format offers to join the network. A reader that only shows the text does not support the format, and the guest has to type the details instead. We could not test every phone and version, so scan the finished code with a phone from each kind your guests use. The option Show the password on the card gives them a typed fallback.
The password is stored in the code in readable form. Anyone who can scan it, or take a photo of it, can join your network. Print the card where only the people you want can see it, keep a separate guest network if your router offers one, and change the password and reprint the card if it spreads further than you meant. The code is built in your browser, so the name and password are not uploaded. Nothing you type is stored by this page. QR Code is a registered trademark of DENSO WAVE INCORPORATED.
What do I choose for WPA3, hidden and open networks?
The ZXing wiki lists the security types WEP, WPA, WPA2-EAP and nopass, and it does not mention WPA3. The source code of Android's Settings app, which reads these codes, also accepts T:SAE, the name of the WPA3 password method. So the tool offers WPA / WPA2 (T:WPA), WPA3 (SAE) (T:SAE), WEP and No password. If your router has a mixed WPA2 and WPA3 setting, choose WPA / WPA2, because that is the value in the ZXing list. Choose WPA3 (SAE) only for a WPA3-only network, and test it, since a scanner that follows the ZXing list may ignore SAE. Enterprise networks that need a user name are not covered by this tool.
A hidden network adds H:true; before the final semicolons, so a phone can try to join a name it cannot see in its list. An open network uses T:nopass, leaves the password out, and is the only case where the password box is switched off. If a code does not join, check the name for a trailing space and compare capital letters with the router label; the name and password are case sensitive.
Use it with
- QR Code Generator: QR for URL, text, logo, colors.
- vCard QR Code Generator: contact card as QR.
- Barcode Generator: EAN, UPC, Code128.
Questions
How do I make a QR code for my Wi-Fi?
Enter the network name and password, choose the security type, and the code appears. Print the card or download it as SVG or PNG, then scan it with a phone to check it.
Which characters need a backslash?
The ZXing wiki lists the backslash, semicolon, comma, double quote and colon. The tool escapes all five in the name and the password for you.
Is it safe to put my Wi-Fi password in a QR code?
The password is readable by anyone who scans or photographs the code. Share it only where you would be comfortable sharing the password itself, and change it if it leaks.
What do I choose for WPA3?
For a mixed WPA2 and WPA3 router, choose WPA / WPA2, which writes T:WPA from the ZXing list. For a WPA3-only network choose WPA3 (SAE), which writes T:SAE: Android's Settings reads it, but the ZXing list has no WPA3 entry, so test the code on your guests' phones.
Can I make a code for a hidden or open network?
Yes. Tick Hidden network to add H:true, or pick No password for an open network. An open code has no password in it.
Is my Wi-Fi password sent anywhere?
No. The code is drawn in your browser and the files are made on your device.
Sources
How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.