Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Unit and size converters

Unit converter

Pick a category, type a number and choose the two units. You get the answer, the factor behind it and the same value in every unit of that category.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

What are you converting?
Length

8.04672 km5 mi converted to Kilometer (km)

  • 1 mi = 1.609344 km
  • 1 km = 0.6213711922 mi
  • Exact factors
Multiply by
1.609344
Or divide by
0.6213711922
1 mi in m
1,609.344
1 km in m
1,000
5 mi in every length unitValue
Millimeter (mm)8,046,720
Centimeter (cm)804,672
Meter (m)8,046.72
Kilometer (km)8.04672
Inch (in)316,800
Foot (ft)26,400
Yard (yd)8,800
Mile (mi)5
Nautical mile (nmi)4.34488121

Formula: result = value × (1 mi in m ÷ 1 km in m)

Your numbers: 5 × (1,609.344 ÷ 1,000) = 5 × 1.609344 = 8.04672 km

How to use the All-in-One Unit Converter

  1. Under What are you converting? choose a category such as Length, Volume or Temperature.
  2. Type the Value, then choose the From and To units. Swap units reverses the pair.
  3. Read the answer, the factor chips and the table that lists the value in every unit of the category.
  4. Check Formula and Your numbers for the sum, and use Copy result to copy the line.

How do I convert between units of length, weight, volume and area?

Multiply the number by the factor that links the two units. For miles to kilometers the factor is 1.609344, so 5 miles = 5 × 1.609344 = 8.04672 km. Choose the category, type the value and pick the From and To units. The factor chips under the answer show the multiplier in both directions, so you can repeat the sum by hand.

Behind the page, each unit is stored as a multiple of one base unit per category: the meter for length, the kilogram for mass, the liter for volume and the square meter for area. A conversion is value × (from factor ÷ to factor). A pound is 0.45359237 kg and a kilogram is 1, so 150 pounds = 150 × 0.45359237 = 68.0388555 kg. The sum goes through the base unit without any rounding, so the answer matches a one-step conversion.

The table under the answer lists the same value in every unit of the category, so one entry answers several questions. One acre is 43,560 square feet, 4,046.856422 square meters or 0.4046856422 hectare, and one square mile is 640 acres. The same layout works for speed (60 mph is 96.56064 km/h), energy (1 kWh is 3.6 MJ) and the other categories.

To find the metric equivalent of an imperial unit, look it up in the From list and choose the metric unit in the To list. An inch is exactly 2.54 cm, a foot exactly 0.3048 m, a pound exactly 0.45359237 kg and a US gallon exactly 3.785411784 L.

What is the difference between US and UK pints and gallons?

A UK (imperial) gallon is 4.54609 liters and a US gallon is 3.785411784 liters, so the UK gallon is about 1.2009 US gallons. The names match but the sizes do not, which is why a fuel figure or a recipe in gallons has to say which one. NIST lists the US liquid gallon as 231 cubic inches, and the UK gallon is defined in the Units of Measurement Regulations 1995.

The pint differs in two ways. A US pint is 16 US fluid ounces and a UK pint is 20 UK fluid ounces. The UK fluid ounce is also a little smaller than the US one. A UK pint is 0.56826125 liters and a US pint is 0.473176473 liters, which gives the same 1.2009 ratio as the gallon, because both are an eighth of their gallon. The table lists three pairs.

US and UK liquid units in liters
UnitUSUKUK ÷ US
fluid ounce0.029573529560.02841306250.96076
pint0.4731764730.568261251.2009
gallon3.7854117844.546091.2009

The US cup here is 8 US fluid ounces, which is 236.5882365 mL. A recipe written for another cup size will not match it. For ingredients, the recipe converter scales amounts and swaps units, while this page converts a single quantity.

How accurate is the conversion, and which factors are exact?

Factors that NIST marks as exact are used in full, with no rounding. The table below lists some of them. The calculator keeps every digit through the sum and rounds the answer to 10 significant digits only at the end, so 1 acre comes out as exactly 43,560 square feet rather than 43,559.99999.

A few factors are not exact in the NIST tables, for example the pound per square inch (psi), the millimeter of mercury, the Btu and the foot-pound force. For these the page uses the factor as NIST prints it, with 7 significant digits, shows the answer to 7 digits and marks the chip Rounded factor. 1 atm is 14.69595 psi.

Convert once, from the original number. Taking a rounded answer and converting it again adds the rounding twice. The Value box accepts decimals, negative numbers and thousands commas.

Factors used by the converter, as multiples of the base unit
UnitEqualsExact?
Inch (in)0.0254 mYes
Foot (ft)0.3048 mYes
Yard (yd)0.9144 mYes
Mile (mi)1,609.344 mYes
Nautical mile (nmi)1,852 mYes
Pound (lb)0.45359237 kgYes
Ounce (oz)0.02834952313 kgYes
Short ton (US)907.18474 kgYes
US gallon (gal)3.785411784 LYes
UK gallon4.54609 LYes
Acre (ac)4,046.856422 m²Yes
Pound per square inch (psi)6,894.757 PaNo: NIST prints 7 digits

How do I convert temperature between Celsius, Fahrenheit and Kelvin?

Temperature scales start at different zero points, so converting needs an offset as well as a factor. The formulas are °F = °C × 9 ÷ 5 + 32 and °C = (°F − 32) × 5 ÷ 9. For 72 °F, subtract 32 to get 40, multiply by 5 to get 200 and divide by 9. The answer is 22.22222222 °C. In the other direction, 100 °C is 212 °F.

Kelvin is Celsius plus 273.15, so 0 K is -273.15 °C. Kelvin has no negative values: a temperature below absolute zero gets a message instead of a number. The Celsius and Fahrenheit scales meet at one point, where -40 °C equals −40 °F.

A temperature difference converts without the offset. A change of 10 °C is a change of 18 °F, because only the 9 ÷ 5 factor applies. The page converts readings, not differences.

How do I convert data sizes, time, energy and pressure?

Data sizes come in two families. kB, MB and GB count in 1,000s. KiB, MiB and GiB count in 1,024s, as NIST lists the binary prefixes. One GiB is 1,073.741824 MB. A byte is 8 bits, so the bit is stored as 0.125 of a byte and the same factor table handles bits too. The video file size calculator shows a file size in both families.

Time units use exact seconds. A week is 168 hours, and the year is a 365-day year, so leap years are not counted. Pick Time from the category chips for these.

Energy has more than one calorie, so the page names its choice. The calorie is the thermochemical calorie of exactly 4.184 joules, which makes a kilocalorie 4.184 kJ, and a watt hour is exactly 3,600 joules. For pressure, a bar is exactly 100,000 pascals and a standard atmosphere is exactly 101,325 pascals, or 101.325 kPa. If a label or a manual uses a different definition of a unit with the same name, check its own table before you trust the converted number.

Use it with

Questions

How do I convert between units of length, weight, volume and area?

Multiply by the factor that links the units: 5 miles × 1.609344 = 8.04672 km, 150 pounds × 0.45359237 = 68.0388555 kg. The converter does the sum through a base unit and shows the factor.

What is the difference between US and UK pints and gallons?

A US gallon is 3.785411784 liters and a UK gallon is 4.54609 liters, about 1.2009 times larger. A US pint is 0.473176473 L (16 US fluid ounces) and a UK pint is 0.56826125 L (20 UK fluid ounces).

How accurate is the conversion?

Factors NIST marks as exact are used in full and the answer is rounded to 10 significant digits at the end. Factors NIST prints to 7 digits, such as psi, give a 7-digit answer.

Can I convert several units at once?

Yes. The table under the answer shows the value in every unit of the category, so one entry gives the length in millimeters, feet, miles and the rest.

What is the metric equivalent of an imperial unit?

An inch is 2.54 cm, a foot 0.3048 m, a yard 0.9144 m, a mile 1.609344 km, a pound 0.45359237 kg and a US gallon 3.785411784 L. All of these are exact.

How do I convert Fahrenheit to Celsius?

Subtract 32 and multiply by 5 ÷ 9. 72 °F is 22.22222222 °C. Going back, 22.22222222 × 9 ÷ 5 + 32 is 72 °F.

How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.