Free tool · Health and fitness
1RM calculator
Type the weight and reps from one hard set. You get an estimated one-rep max by three named formulas, plus a chart of weights at each percent of it.
- Free
- No sign-up
- Runs in your browser
Estimated 1RM 120.0 kgEpley, from 100.0 kg for 6 reps
- Epley
- An estimate, not a tested max
- Epley
- 120.0 kg
- Brzycki
- 116.1 kg
- O'Connor
- 115.0 kg
| % of 1RM | Weight | Reps (est.) |
|---|---|---|
| 100% | 120.0 kg | 1 |
| 95% | 114.0 kg | 2 |
| 90% | 108.0 kg | 3 |
| 85% | 102.0 kg | 5 |
| 80% | 96.0 kg | 8 |
| 75% | 90.0 kg | 10 |
| 70% | 84.0 kg | 13 |
| 65% | 78.0 kg | 16 |
| 60% | 72.0 kg | 20 |
| 55% | 66.0 kg | 25 |
| 50% | 60.0 kg | 30 |
Formula (Epley): 1RM = weight × (1 + reps ÷ 30)
Your numbers: 100.0 × (1 + 6 ÷ 30) = 120.0 kg
The reps column turns the same formula around, so it is an estimate too, and the more reps in the set, the less reliable it gets. These are not training prescriptions. Heavy lifts are safer with a spotter or safety bars, and a doctor or qualified coach can advise before you test a real max.
How to use the One Rep Max Calculator
- Choose Kilograms (kg) or Pounds (lb).
- Type the Weight lifted and the Reps done (1 to 30) in one hard set.
- Pick the Formula for the headline number. All three are listed under the answer.
- Read the % of 1RM chart and Your numbers under Result.
How do I calculate my one rep max without maxing out?
A one-rep max (1RM) is the heaviest weight you can lift once with good form. You can estimate it from a lighter set of several reps instead of testing it, using a formula that grows the weight with the number of reps. Type the weight and the reps you completed in a hard set, and the tool applies three named formulas. With 100 kg for 6 reps, Epley gives 100 × (1 + 6 ÷ 30) = 120.0 kg, Brzycki gives 100 × 36 ÷ (37 − 6) = 116.1 kg and O'Connor gives 100 × (1 + 0.025 × 6) = 115.0 kg.
With a single rep the lifted weight is the one-rep max, so the tool returns it unchanged. The Brzycki formula divides by 37 minus the reps, so it breaks down as reps approach 37, which is one reason the tool stops at 30. Use the weight and reps of one set taken close to failure, and count only reps with the same form on every one.
Which 1RM formula is best?
None is best for everyone. Papers print Epley as 1RM = load × (1 + 0.0333 × reps), which is the same as load × (1 + reps ÷ 30), and credit it to a poundage chart in the Boyd Epley Workout (1985). Brzycki is printed as 1RM = load ÷ (1.0278 − 0.0278 × reps), or load × 36 ÷ (37 − reps), from a 1993 article in the Journal of Physical Education, Recreation and Dance. The tool also lists the simple linear form load × (1 + 0.025 × reps) credited to O'Connor and colleagues (1989).
The three agree fairly well at low reps and drift apart as reps rise. At 3 reps with 100 kg they give 110.0 kg (Epley), 105.9 kg (Brzycki) and 107.5 kg (O'Connor). At 15 reps they give 150.0, 163.6 and 137.5 kg, a spread of more than 26 kg. That is why the tool lists all three: if they are close, the estimate is firmer, and if they are far apart, treat the number as a rough range.
What percentage of 1RM should I use, and how accurate is this?
A 2022 paper in the Journal of Human Kinetics notes that these equations seem accurate mainly when the test load is close to a one-rep max. It cites work that found better predictions from a 5-rep max load than from a 10-rep or 20-rep max load, and a 2014 study in which both equations predicted a back squat 1RM within about 3 kg from a 3-rep or 5-rep test. So the fewer reps in your set, the more you can lean on the number.
The chart shows your weight at each percent of the estimated 1RM, from 100 percent down to 50 percent, and the number of reps the same formula implies at that percent. For the Epley example, 80 percent of 120.0 kg is 96.0 kg for about 8 reps. The reps column turns the formula around, so it is an estimate too, and counts above 30 are shown as 30+.
This page does not suggest percentages for strength, size or endurance goals, because it cites no official source for them. Treat the numbers as a starting point and not a training prescription. Heavy lifts are safer with a spotter or safety bars. If you have a health condition, ask a doctor or a qualified coach before you test a real maximum.
Use it with
- Heart Rate Zone Calculator: training zones from age and resting HR.
- Calories Burned Calculator: calories by activity and time.
- BMR Calculator: basal metabolic rate.
Questions
How do I calculate my one rep max without maxing out?
Lift a weight for several reps in one hard set, then put the weight and reps into a formula. Epley is weight × (1 + reps ÷ 30). For 100 kg for 6 reps that is 120.0 kg.
What is the Epley formula?
1RM = weight × (1 + reps ÷ 30), printed in papers as load × (1 + 0.0333 × reps). It is credited to a poundage chart in the 1985 Boyd Epley Workout.
What is the Brzycki formula?
1RM = weight × 36 ÷ (37 − reps), printed as load ÷ (1.0278 − 0.0278 × reps). It was published by Brzycki in 1993 and cannot be used at 37 reps or more.
Which 1RM formula is most accurate?
It depends on the lift and the number of reps, and this page does not name a winner. A 2022 paper says these equations seem accurate mainly when the test load is close to a 1RM. The tool shows all three so you can see the spread.
How many reps should I use for the estimate?
Fewer is better. A 5-rep max load predicted 1RM better than a 10-rep or 20-rep max load in work cited by a 2022 paper. Use one hard set taken close to failure.
Is it safe to test my real one rep max?
Heavy singles are safer with a spotter or safety bars, and a doctor or qualified coach can advise if you have a health condition. The estimate is a way to avoid testing a true max.
Sources
- Macarilla et al. 2022, Accuracy of Predicting One-Repetition Maximum from Submaximal Velocity in the Barbell Back Squat and Bench Press, J Hum Kinet 82:201-212 (prints the Epley and Brzycki equations and notes on accuracy), read
- Beia et al. 2024, Developing Accurate Repetition Prediction Equations for Trained Older Adults with Osteopenia, Sports 12(9):233 (Table 1 prints the Brzycki, Epley and O'Connor equations with their citations), read
How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.