Free tool · Health and fitness
mg/dL to mmol/L converter
Convert a lab value between mg/dL and mmol/L in either direction. The factor is worked out from the molar mass of what is measured, so you can see where it comes from.
- Free
- No sign-up
- Runs in your browser
100 mg/dL = 5.55 mmol/LGlucose (blood sugar): 1 mmol/L = 18.016 mg/dL, from a molar mass of 180.16 g/mol
- Glucose (blood sugar)
- Factor 18.016
- Units only, not a diagnosis
- In mg/dL
- 100 mg/dL
- In mmol/L
- 5.55 mmol/L
- Factor
- 18.016 mg/dL per mmol/L
- Molar mass
- 180.16 g/mol
| mg/dL | mmol/L |
|---|---|
| 70 | 3.89 |
| 80 | 4.44 |
| 90 | 5.00 |
| 100 | 5.55 |
| 110 | 6.11 |
| 120 | 6.66 |
| 126 | 6.99 |
| 140 | 7.77 |
| 160 | 8.88 |
| 180 | 9.99 |
| 200 | 11.10 |
| 250 | 13.88 |
| 300 | 16.65 |
Formula: 1 mmol/L = molar mass in mg per mmol ÷ 10 mg/dL = 180.16 ÷ 10 = 18.016 mg/dL (a liter is 10 deciliters). mmol/L = mg/dL ÷ factor. The molar mass is for D-glucose, C6H12O6.
Your numbers: 100 ÷ 18.016 = 5.5506 mmol/L
Glucose test cut-offs the CDC lists (mg/dL)
| Column | Fasting | 2-hour tolerance test |
|---|---|---|
| Normal | 99 or below5.5 mmol/L or below | 140 or below7.8 mmol/L or below |
| Prediabetes | 100 to 1255.6 to 6.9 mmol/L | 140 to 1997.8 to 11.0 mmol/L |
| Diabetes | 126 or above7.0 mmol/L or above | 200 or above11.1 mmol/L or above |
The CDC also lists a random blood sugar of 200 mg/dL (11.1 mmol/L) or above in its diabetes column. These are the CDC's published cut-offs for each test, shown for reference: they do not say what your own number means, and a result depends on the test type and timing. The CDC says to ask your doctor what your results mean.
This converts units only. It does not say whether a result is healthy, and no reference ranges are shown for cholesterol or triglycerides. Check the unit printed on your lab report, and talk to a doctor about what your numbers mean.
How to use the Blood Sugar Unit Converter
- Under What are you converting? pick glucose, cholesterol, triglycerides, or A1C.
- Choose the Direction: mg/dL to mmol/L or mmol/L to mg/dL.
- Type the Value in mg/dL or the Value in mmol/L from your lab report. For A1C type the percent.
- Read the converted value, the factor and the table of common values under Result.
How do I convert mg/dL to mmol/L, and what is the formula?
The two units measure the same amount in different ways. mg/dL is milligrams per deciliter, a mass per volume. mmol/L is millimoles per liter, a count of molecules per volume, so the link between them is the molar mass of the substance. One millimole weighs as many milligrams as the molar mass in grams per mole, and a liter is 10 deciliters, so 1 mmol/L = molar mass ÷ 10 mg/dL.
For glucose the molar mass is 180.16 g/mol (PubChem, D-glucose, C6H12O6), so 1 mmol/L = 18.016 mg/dL. The formula is mmol/L = mg/dL ÷ 18.016, and the reverse is mg/dL = mmol/L × 18.016. A reading of 100 mg/dL is 100 ÷ 18.016 = 5.55 mmol/L, and 5.5 mmol/L is 5.5 × 18.016 = 99.1 mg/dL. Dividing by a rounded 18 instead gives 5.56 for 100 mg/dL, a difference of about 0.1 percent.
Cholesterol has a molar mass of 386.7 g/mol (C27H46O), so its factor is 38.67 and 200 mg/dL is 200 ÷ 38.67 = 5.17 mmol/L. The same factor is used here for total, LDL and HDL cholesterol. Triglycerides are a mix of fats with no single molar mass, so the tool uses triolein (885.4 g/mol) as a representative and the factor 88.54. That is an approximation: 150 mg/dL comes out as 1.69 mmol/L, and your lab report is the reference.
What are the glucose test cut-offs in both units?
The CDC lists cut-offs for the main diabetes tests in mg/dL. For a fasting blood sugar it lists 99 mg/dL or below in its normal column, 100 to 125 in the prediabetes column and 126 or above in the diabetes column. For the 2-hour glucose tolerance test the columns are 140 or below, 140 to 199, and 200 or above, and a random blood sugar of 200 or above is listed under diabetes. Converted with the factor above, 100 mg/dL is 5.6 mmol/L, 126 is 7.0 and 200 is 11.1 mmol/L. A glucose result shows this table.
These are the CDC's published cut-offs for each test, shown for reference. They do not say what your own number means, because the type of test and the timing matter, and the CDC says your doctor may want to re-test you to make sure the results are accurate. This page does not label your value and gives no treatment targets. Cholesterol and triglyceride cards show no ranges, because no official page for them was opened. Ask a doctor what your numbers mean.
How do I convert A1C to average glucose?
The CDC describes the A1C test as measuring your average blood sugar over the past 2 or 3 months, and reports it as a percent. Nathan and colleagues compared A1C with average glucose in 507 people (type 1, type 2 and no diabetes) and found average glucose (mg/dL) = 28.7 × A1C − 46.7, with R² = 0.84. Choose A1C (%) to average glucose to apply it: an A1C of 6.0 gives 28.7 × 6 − 46.7 = 125.5 mg/dL, which is 6.97 mmol/L, and 7.0 gives 154.2 mg/dL or 8.56 mmol/L.
The link is strong but not perfect, so the result is an estimated average glucose (eAG), not a reading, and individual people can sit above or below it. mmol/L and mg/dL are only different ways to write the same glucose; which one your lab prints is the lab's choice, so read the unit on your report before you convert. Talk to a doctor about what your A1C or glucose means for you.
Use it with
- BMI Calculator: body mass index with chart.
- BMR Calculator: basal metabolic rate.
- Body Fat Calculator: navy method body fat %.
Questions
How do I convert mg/dL to mmol/L?
For glucose, divide by 18.016: 100 mg/dL is 100 ÷ 18.016 = 5.55 mmol/L. For cholesterol divide by 38.67 and for triglycerides by 88.54.
Why is the factor 18 for glucose?
The molar mass of glucose is 180.16 g/mol. One mmol/L is 180.16 mg per liter, which is 18.016 mg/dL. Dividing by 18 is a rounded version of that.
How do I convert mmol/L to mg/dL?
Multiply by the factor: 5.5 mmol/L of glucose is 5.5 × 18.016 = 99.1 mg/dL.
Is the cholesterol factor the same for LDL, HDL and total?
Yes, they are all cholesterol, so the factor 38.67 (from 386.7 g/mol) applies to each. Triglycerides use a different, approximate factor of 88.54.
How do I convert A1C to average glucose?
Nathan and colleagues found average glucose (mg/dL) = 28.7 × A1C − 46.7. An A1C of 6.0 gives about 125.5 mg/dL (6.97 mmol/L). It is an estimate, not a reading.
What do the CDC glucose cut-offs mean for me?
The tool shows the CDC's published cut-offs for reference, in both units. They do not say what your own result means, so ask your doctor.
Sources
- PubChem compound record: D-glucose, C6H12O6, molecular weight 180.16 (CID 5793), read
- PubChem compound record: cholesterol, C27H46O, molecular weight 386.7 (CID 5997), read
- PubChem compound record: triolein, C57H104O6, molecular weight 885.4 (CID 5497163), read
- CDC: Diabetes tests (A1C, fasting, glucose tolerance and random cut-offs in mg/dL), read
- Nathan et al. 2008, Translating the A1C assay into estimated average glucose values, Diabetes Care 31:1473-1478 (PubMed record), read
How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.