Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Health and fitness

Body fat calculator

Estimate body fat with the US Navy tape method from your neck, waist and height (and hip). The formula is shown with your numbers.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

Units
Sex used by the formula

Use a flat tape against the skin. Men: waist at the level of the navel. Women: waist at the narrowest part of the abdomen and hip at the widest part of the buttocks. Weight is only used to split the estimate into fat and non-fat mass. The values shown are examples: type your own.

Result

Body fat 17.3%US Navy method: an estimate that can be several points off

  • US Navy method
  • Neck, waist, height
  • Tape in cm
Body fat (estimate)
17.3%
Waist minus neck
48.0 cm
Height used
178.0 cm
Fat mass (estimate)
13.5 kg
Non-fat mass (estimate)
64.5 kg

Formula (lengths in inches): men: %fat = 86.010 × log10(waist − neck) − 70.041 × log10(height) + 36.76

Your numbers: 86.010 × log10(33.86 − 14.96) − 70.041 × log10(70.08) + 36.76 = 17.3

How good is it? In a 2022 study of US Marines the method was about 2.5 points low for men and 1 to 2 points high for women against DXA scans, with 3.7 to 4.8 points of spread between people. This tool does not say whether a result is healthy. Ask a doctor what your number means for you.

How to use the Body Fat Calculator

  1. Choose Metric (cm, kg) or US (in, lb), and the Sex used by the formula.
  2. Measure with a flat tape and type Height, Neck and Waist. For the women's formula add Hip.
  3. Add Weight, optional if you want the estimate split into fat and non-fat mass.
  4. Read Body fat under Result, and Your numbers to see the sum.

How do I measure body fat with a tape measure, and where exactly do I measure?

The US Navy method estimates body fat from a few tape measurements and your height. The equations are credited to Hodgdon and Beckett (1984), and a 2022 US Marine Corps study still prints them. With all lengths in inches, the formula for men is 86.010 × log10(waist − neck) − 70.041 × log10(height) + 36.76, and for women 163.205 × log10(waist + hip − neck) − 97.684 × log10(height) − 78.387. If you choose metric, the tool divides each length by 2.54 first, so you never have to convert by hand.

Use a tape held flat against the skin. A study of US Marines describes the sites this way: for men, neck and waist at the level of the navel; for women, the waist at the thinnest part of the abdomen and the hips at the greatest protrusion of the buttocks. Take each measurement more than once, because small differences in where the tape sits change the result.

Worked example 1, a man with a height of 70 in, neck of 15 in and waist of 34 in. Waist minus neck is 19 in. log10(19) = 1.2788 and log10(70) = 1.8451, so the estimate is 86.010 × 1.2788 − 70.041 × 1.8451 + 36.76 = 17.5 percent. The page shows the same working for your numbers.

Worked example 2, a woman with a height of 65 in, neck of 13 in, waist of 29 in and hip of 38 in. Waist plus hip minus neck is 54 in. log10(54) = 1.7324 and log10(65) = 1.8129, so the estimate is 163.205 × 1.7324 − 97.684 × 1.8129 − 78.387 = 27.3 percent.

What do I enter in metric units, and what are fat mass and non-fat mass?

Metric works the same way. The page opens with a man of 178 cm, neck 38 cm and waist 86 cm. In inches those are 70.08, 14.96 and 33.86, and the formula gives 17.3 percent. Metric and US input give the same answer for the same body, apart from rounding of the tape reading.

Weight is optional. If you type it, the tool multiplies it by the percentage to split the estimate: fat mass = weight × body fat ÷ 100, and non-fat mass is the rest. For the same man at 78 kg that is 13.5 kg of fat and 64.5 kg of non-fat mass. Non-fat mass is everything that is not fat: muscle, bone, organs and water. The formula itself never uses weight, so changing it does not change the percentage.

The tool shows an error when the numbers do not make a believable result. For men, the waist must be larger than the neck, or the logarithm is undefined. A result below 2 percent or above 60 percent is also refused. Both usually mean a wrong unit, a tape in the wrong place or a typing slip.

How much does a waist measurement change the result?

The formula is built on logarithms of a difference, so the same tape error matters more when the waist is close to the neck. The table keeps the other measurements fixed and changes only the waist. The first column is a man of 70 in with a 15 in neck, the second a woman of 65 in with a 13 in neck and a 38 in hip. Every cell is the estimate from the tool's own function.

US Navy estimate by waist, in percent body fat
WaistMan 70 in, neck 15 inWoman 65 in, neck 13 in, hip 38 in
28 in3.3%25.9%
30 in8.7%28.6%
32 in13.4%31.1%
34 in17.5%33.5%
36 in21.3%35.9%
38 in24.6%38.2%
40 in27.8%40.4%

Read down a column to see the effect. For the man, going from a 32 in to a 34 in waist moves the estimate from 13.4 to 17.5 percent, 4.2 points for 2 inches. In metric, 1 cm of waist in the 178 cm example moves the answer by 0.77 percentage points, so measure twice.

How accurate is the Navy method, and what is a healthy body fat percentage?

It is an estimate and it can be several points off for one person. In a 2022 study of US Marines, measured against DXA scans, the method underestimated body fat in men by about 2.5 percentage points on average and overestimated it in women by about 1 to 2 points, with a spread (standard deviation) between people of 3.7 to 4.8 points. The paper cites reproducibility between experienced observers of about ±1 body fat unit. Its authors write that the method may be useful for standards categorization but is not valid as a quantitative research tool. Do not use the estimate to track small changes from week to week.

This tool does not label your result as low, healthy or high. Ranges differ by age, sex and measuring method, and this page does not cite an official table for them, so it leaves the judgment out rather than guess. A percentage from a tape formula also cannot be compared with one from a DXA scan, a skinfold caliper or a smart scale, because each method has its own error.

If you want to know what your body fat means for your health, ask a doctor or a registered dietitian. Anyone with a history of disordered eating should talk to a professional before using any body measurement as a target. The studies cited here tested adults, so for children, teenagers or pregnancy ask a doctor instead. The BMI Calculator on this site gives a different, simpler measure from height and weight, and the BMR Calculator estimates resting energy.

Use it with

Questions

How do I calculate body fat with the Navy method?

Measure height, neck and waist (and hip for women) and put them into the Hodgdon and Beckett equations in inches. This tool does the logarithms for you and shows the working. A man of 70 in with a 15 in neck and 34 in waist gets 17.5 percent.

Where do I measure my neck, waist and hip?

Use a flat tape against the skin. Men measure the waist at the level of the navel. Women measure the waist at the thinnest part of the abdomen and the hips at the widest part of the buttocks.

How accurate is the Navy body fat method?

In a 2022 Marine Corps study against DXA scans it was about 2.5 points low for men and 1 to 2 points high for women on average, with 3.7 to 4.8 points of spread between individuals. Treat it as a rough estimate.

Why does the tool not tell me if my body fat is healthy?

Healthy ranges depend on age, sex and method, and this page does not cite an official table, so the tool gives the number only. A doctor can put it in context.

Do I have to type my weight?

No. The formula uses only height and tape measurements. Weight is optional and is used only to split the estimate into fat mass and non-fat mass.

Does it work for teenagers or pregnant women?

The studies cited here tested adults, so this tool is for adults. For children, teenagers or pregnancy, ask a doctor instead.

How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.