Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Audio and video

Mic test

Press start, allow the microphone and speak: if the bar moves with your voice, the microphone works. A short test recording lets you hear what others hear, and the audio never leaves your device.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

Your browser will ask for permission. The sound is analysed in this page and is not recorded or uploaded unless you press the test recording button.

The list shows the microphones your browser can see. Pick another one and the test restarts with it.

What the browser does to the sound

These are on by default in most browsers. Switch them off to hear what the microphone itself delivers.

Start the test first. Use headphones, so the playback is not picked up by the microphone again.

Microphone level
Not startedPress Start microphone test and allow the microphone when your browser asks.
  • Microphone off
Microphone in use
none yet
Peak, last 2 seconds
–
Sample rate
–
Channels
–
Browser processing
–

The guide under the number is this page's own rule of thumb for speech, measured as level in decibels below full scale (0 dB is the loudest the browser can pass on). It is not a standard. Everything stays on your device.

How to use the Mic Test

  1. Press Start microphone test and allow the microphone when your browser asks for it.
  2. Speak at your normal volume. The bar and the number under Microphone level follow your voice, and a note says whether the level is quiet, good or too loud.
  3. If you have more than one microphone, pick the right one under Microphone. The test restarts with it.
  4. Press Record 5 seconds and play back to hear yourself, ideally with headphones. Press Stop when you are done.

How do I test my microphone online?

Press Start microphone test, allow the microphone and speak. If the bar and the decibel number move with your voice, the microphone, the browser permission and the system settings all work. The page opens the microphone only after you press the button. It does not play the sound through your speakers, so it cannot cause a howl, and it records nothing until you press the test recording button.

The test recording is the best proof. It keeps 5 seconds in this tab and plays them back, so you hear what others would hear. Use headphones. The recording is replaced when you record again and is gone when you close the page. The sound is analyzed in your browser and the page's code makes no network request with it, so it never leaves your device. To keep a longer take as a file, use the online voice recorder.

What does the decibel number mean, and what level is good?

The number is the level in decibels relative to full scale (dB). 0 dB is the loudest signal the browser can pass on. On every frame the page takes a block of 2,048 samples, works out their root mean square (RMS), and converts it with dB = 20 × log10(RMS). Every halving of the level subtracts about 6 dB: an RMS of 0.5 reads -6 dB.

Three example tones, each a 100 Hz sine wave. At full scale (amplitude 1) the RMS is 0.707, so the reading is -3 dB while the peak is +0 dB: for a sine wave the average level sits 3 dB below the top. A tone at 0.1 of full scale reads -23 dB, fills 62% of the bar and is called "Good level" by this page. A tone at 0.01 reads -43 dB, fills 28% and is "Quiet". A tone at 0.5 reads -9 dB, which is just above the -10 dB line, so the page calls it "Very loud".

The words under the number are this page's own rule of thumb for speech, not a standard. Below -60 dB it says no sound was heard. From -60 to -45 dB is very quiet, from -45 to -30 dB quiet, from -30 to -10 dB a good level, and above -10 dB very loud, where the sound can distort. The table runs ten levels through the same chain as the live meter.

RMS level, decibels, meter position and the page's label
RMS level (share of full scale)ReadingBar fillPage's guide
1+0 dB100%Very loud
0.5-6 dB90%Very loud
0.2-14 dB77%Good level
0.1-20 dB67%Good level
0.05-26 dB57%Good level
0.02-34 dB43%Quiet
0.01-40 dB33%Quiet
0.005-46 dB23%Very quiet
0.002-54 dB10%Very quiet
0.0005-66 dB0%No sound heard

The small marker on the bar and the Peak figure show the loudest moment of the last two seconds, so a short word does not flash past unseen. If a peak of -20 dB is seen at 0.1 s, a quieter -40 dB at 1.5 s leaves the marker at -20 dB, and at 2.2 s it drops to -40 dB.

Why is my mic not working or not detected?

The page names the problem the browser reports. NotAllowedError means the user declined, the page is not in a secure context, or a Permissions Policy blocks it. The page shows "Access to the microphone is blocked". NotFoundError means no microphone matches the request, and the page shows "No microphone was found": check the plug or the headset switch. NotReadableError means permission was granted but a hardware, system, browser or page error blocked the device, and the page shows "The microphone could not be opened": close video calls, recorders and other tabs that use the microphone, then try again.

A flat bar with no error most often means the wrong input is chosen, the microphone is muted, or the system input volume is at zero. The page says "No sound heard" for any level below -60 dB. Pick another device in the list and try again. To check the bar with a steady sound, play a tone from the tone generator near the microphone. To check the camera instead, use the webcam test.

The computer can block the browser even when the site is allowed. On Windows, Microsoft's page says to open Start, then Settings, then Privacy & security, then Microphone. It describes a master switch, a setting for apps and a separate switch that covers all desktop apps at once. On a Mac, Apple's page says to open the Apple menu, then System Settings, then Privacy & Security, then Microphone, and switch access on for each app in the list. If your browser is listed, turn it on and restart the browser.

How do I allow microphone access in my browser?

When the page asks for the microphone, the browser shows a permission prompt. MDN says browsers must ask at least the first time. If you decline, the call fails with a NotAllowedError, and if you ignore the prompt it may never finish: the page then keeps showing "Waiting for permission…" until you answer.

If you blocked the microphone by mistake, change it in the browser. In Chrome, Google's help page says to open Settings, then Privacy and security, then Site settings, then Microphone, and either delete the site's exception or change a site under "Not allowed" to Allow. Reload this page afterwards. In Safari on a Mac, Apple's page says to use the Page menu, then Website Settings, or Safari, then Settings, then Websites.

The page needs a secure connection. MDN says the microphone call works only in secure contexts, and that in an insecure one the browser gives the page no media devices object. The page then shows "This page cannot use the microphone here".

How do I choose the microphone and its settings?

Pick the microphone in the Microphone list and the test restarts with it. The list shows the inputs your browser can see: a built-in microphone, a headset, a webcam or a USB device. If the browser gives no name for one, the page numbers it, such as "Microphone 2". A chosen device is requested as an exact match: MDN says an exact constraint must match or the request fails. For the example device "mic-1" the request carries deviceId {"exact":"mic-1"}, and if that device is gone the page falls back to the default microphone.

The three switches under "What the browser does to the sound" ask the browser to apply echo cancellation, noise suppression and automatic gain control. MDN calls each a preference or requirement, and the page passes plain true or false values, which the browser tries to match. Because the browser may not honor a setting, the page reads back what it reports: for a mono 48 kHz stream with echo cancellation on and noise suppression off, the facts read 48 kHz, mono, echo on, noise off and gain not reported. "Not reported" means the browser gave no value. Switch all three off to hear what the microphone itself delivers.

Use it with

Questions

How do I test my microphone online?

Press Start microphone test, allow the microphone and speak. If the bar and the decibel number move with your voice, it works. For a real check, press Record 5 seconds and play back.

Why is my mic not working or not detected?

The page shows the problem the browser reports: "Access to the microphone is blocked", "No microphone was found" or "The microphone could not be opened". A flat bar with no error usually means the wrong input, a muted microphone or a system volume of zero. Any level below -60 dB reads "No sound heard".

How do I allow microphone access in my browser?

In Chrome: Settings, Privacy and security, Site settings, Microphone, then allow this site or delete its exception. In Safari on a Mac: Page menu, Website Settings. Then reload the page.

What is a good microphone level in dB?

In this page's own guide, -30 to -10 dB is a good level for speech, -45 to -30 dB is quiet and above -10 dB is very loud. A tone at 0.1 of full scale reads -23 dB. The guide is a rule of thumb, not a standard.

How do I choose the right input device?

Use the Microphone list on the page. Choosing another device restarts the test with it. If the browser gives no name, the page numbers the devices, for example Microphone 2.

Is my voice recorded or uploaded?

No. The sound is analyzed in your browser and the page's code never sends it anywhere. Only if you press the test recording button does the page keep 5 seconds, in this tab, until you close it or record again.

How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.