Free tool · Audio and video
Online voice recorder
Press record, speak, pause if you need to, then play the recording back and download it. The audio is made and kept in your browser and never leaves your device.
- Free
- No sign-up
- Runs in your browser
- Not recording
- Length
- –
- Size
- –
- Format
- –
- Microphone
- none yet
The recording exists only in this tab until you download it.
Download keeps the format your browser recorded in (WebM or MP4, small files). Download as WAV converts it to uncompressed WAV in your browser for recordings up to 20 minutes: the file is much larger. The page does not trim or edit audio.
How to use the Online Voice Recorder
- Choose the right microphone under Microphone, then press Start recording and allow the microphone.
- Speak. The timer and the level bar run. Press Pause to hold and Resume to carry on.
- Press Stop. The microphone turns off and your recording appears under Your recording. Press play to listen.
- Press Download to save the file, or Download as WAV for an uncompressed copy. Discard removes it.
How do I record audio online and download it?
Press Start recording, allow the microphone, speak, then press Stop. Play the result and press Download. The page uses the recorder built into your browser: MDN says a MediaRecorder records a media stream and hands over the data in pieces. This page asks for a piece every second, so a long recording is built up as you go. The timer counts only the time you really record, so paused time is not included.
When the page asks for the microphone, the browser shows a permission prompt, and MDN says browsers must ask at least the first time. If you decline, the page shows "Access to the microphone is blocked" with the steps to allow it again. Stop turns the microphone off at once, puts the pieces together and shows a player. The file is made in your browser and named with the date and time on your clock, for example voice-recording-2026-11-19-140305.webm. Nothing is uploaded at any step: the page's code makes no network request with the audio. To check the level and the device first, use the mic test.
If recording does not start, the page names the problem the browser reports. MDN says NotAllowedError means the user declined, the page is not in a secure context, or a Permissions Policy blocks it, and the page shows "Access to the microphone is blocked". NotFoundError means no microphone matches the request, and the page shows "No microphone was found". NotReadableError means permission was granted but a hardware, system, browser or page error blocked the device, for example another program using it, and the page shows "The microphone could not be opened". If the level bar stays flat while the timer runs, check the Microphone list.
What format is the recording: WebM, MP4, WAV or MP3?
The browser decides, from a list the page offers in order: audio/webm;codecs=opus, audio/webm, audio/mp4, audio/ogg;codecs=opus, audio/ogg. The page asks the browser whether it supports each type (MDN: isTypeSupported returns true or false) and uses the first one that is. A browser that supports only audio/mp4 gets "audio/mp4". The file endings are .webm, .m4a, .ogg, the Format fact names the one you got, and the Download button shows its ending. If the browser supports none of them, it uses its own default.
Download as WAV makes an uncompressed copy. The page decodes your recording to raw samples in the browser and writes a 16-bit PCM WAV file with its own encoder: a 44-byte header, then two bytes for every sample of every channel. It keeps at most two channels, and when the file is saved the page tells you its size, rate, channels and bit depth, for example "WAV saved: 5.76 MB, 48 kHz, mono, 16-bit." Because the whole recording is decoded in memory, the WAV button is offered up to 20 minutes. The page does not make MP3 files. For an MP3, download the file and convert it in an editor or converter you trust.
How big is a WAV file, and is there a time limit?
A WAV file is 44 bytes plus sample rate × channels × 2 bytes for every second. Mono at 48 kHz is 96,000 bytes a second, so one minute comes to 5.76 MB and 20 minutes to 115.2 MB. The table shows the same sum for three common settings. The page writes whatever sample rate your browser decoded, so these are examples. A 90-second mono recording at 48 kHz has 4,320,000 samples and is 44 + 4,320,000 × 1 × 2 = 8,640,044 bytes, or 8.64 MB.
The page stops by itself after 60 minutes and shows a long-recording note from 30 minutes, because a recording lives in the browser's memory. The WAV button is offered up to 20 minutes, while the recorded file itself can run to 60.
| Length | Mono, 44.1 kHz | Mono, 48 kHz | Stereo, 48 kHz |
|---|---|---|---|
| 1 min | 5.29 MB | 5.76 MB | 11.5 MB |
| 5 min | 26.5 MB | 28.8 MB | 57.6 MB |
| 10 min | 52.9 MB | 57.6 MB | 115.2 MB |
| 20 min | 105.8 MB | 115.2 MB | 230.4 MB |
Sizes use 1 MB = 1,000,000 bytes, as the page does. The Size fact shows the real size of the file your browser records while you record, so you can compare it with these figures.
Can I pause the recording, and what makes it stop?
Press Pause to hold and Resume to carry on. The timer subtracts the paused time. Start at 0 s, pause at 10 s, resume at 25 s and look at the clock at 40 s: 40 − 15 is 0:25. While the recording is paused at 30 s the clock still reads 0:10. A pause does not turn the microphone off: the page says the microphone is still open. Press Stop to turn it off.
The page also stops by itself and keeps what was recorded when the page is hidden, for example when you switch to another tab, when the microphone is unplugged or another program takes it, or when the 60 minutes are used up. So the microphone is never left open in the background.
Is my recording uploaded, and how do I trim or edit it?
The recording is not uploaded. It sits in your browser's memory until you download it, so closing the tab loses it: download what matters straight away. Discard removes it, and Record again starts a new one.
The page records and saves. It does not trim or clean audio, so open the downloaded file in an audio editor for that. If your editor does not open the original format, download the WAV copy. The switches under What the browser does to the sound ask for echo cancellation, noise suppression and automatic gain control, which MDN describes as a preference or requirement for each. Switch them off to keep the sound as the microphone delivers it. Make a short test and play it back before a long take.
Use it with
- Webcam Test: check that the camera works.
- Tone Generator: play a pure tone at any frequency.
- Online Notepad: autosaving notepad in the browser.
Questions
How do I record audio online and download it?
Press Start recording, allow the microphone, speak, then press Stop. Play the result and press Download. The recording is made in your browser and is not uploaded.
What format is the recording?
The browser chooses the first supported of audio/webm;codecs=opus, audio/webm, audio/mp4, audio/ogg;codecs=opus, audio/ogg, which gives .webm, .m4a, .ogg files. The page shows which one. You can also download a WAV copy, which the page makes itself.
How big is a recording?
A WAV file is 44 bytes plus sample rate × channels × 2 bytes per second. Mono at 48 kHz is 5.76 MB for one minute and 115.2 MB for 20 minutes. The Size fact shows the real size of the recorded file as you record.
Is there a time limit?
The page stops at 60 minutes and shows a note from 30 minutes, because the recording is kept in memory. The WAV button is offered up to 20 minutes.
Is my recording uploaded anywhere?
No. The audio stays in your browser tab and the page's code makes no network request with it. If you close the tab before you download it, it is lost.
Why does the recording stop when I switch tabs?
So the microphone is never left open in the background. What was recorded up to that moment is kept, and you can play and download it.
Sources
- MDN Web Docs: MediaRecorder (data in pieces, start timeslice, pause and resume, mimeType, isTypeSupported), read
- MDN Web Docs: MediaDevices.getUserMedia() (permission prompt, errors, secure contexts), read
- MDN Web Docs: MediaTrackConstraints (echoCancellation, noiseSuppression, autoGainControl), read
How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.