Free tool · Home and DIY
Brick calculator
Type the wall size, take off the openings and choose your brick to get the bricks, the mortar and the bags of mortar mix.
- Free
- No sign-up
- Runs in your browser
1,469 bricks1,399 bricks for the wall + 5% waste · 686 per 100 ft² of wall face
- Single skin
- 7 5/8 × 3 5/8 × 2 1/4 in, joint 3/8
- 13.54 ft³ of mortar
- 40 bags of mortar mix
- Wall area, whole
- 240.0 ft²
- Openings taken off
- 36.0 ft²
- Brickwork area
- 204.0 ft²
- Bricks, no waste
- 1,399
- Bricks to order
- 1,469
- Mortar, no waste
- 11.28 ft³
- Mortar, with 20% waste
- 13.54 ft³ · 383 L
- Mortar per 1,000 bricks
- 8.06 ft³
- Mortar mix bags
- 40
Formula: bricks per area = 1 ÷ ((length + joint) × (height + joint)) for each skin; bricks = brickwork area × that × skins × (1 + waste ÷ 100). Mortar per brick = width × ((length + joint) × (height + joint) − length × height), plus a joint-thick layer between two skins. Bags = bricks ÷ bricks per bag.
Your numbers: 1 ÷ ((7.625 + 0.375) × (2.25 + 0.375)) = 0.0476 per in² = 6.86 per ft² of one skin; brickwork 204.0 ft² × 6.86 = 1,398.9 bricks; × (1 + 5 ÷ 100) rounds up to 1,469. Mortar 11.28 ft³ × (1 + 20 ÷ 100) = 13.54 ft³.
Waste and the bag yield are rules of thumb, and frogs, spills and uneven bedding use more mortar than the joints alone. Corners, bond patterns, cut bricks and wall ties are not counted: check the totals with your supplier before ordering.
How to use the Brick Calculator
- Choose US or Metric under Units, then type the Wall length, Wall height and the total area of the Openings.
- Pick Single skin or Double skin under Wall thickness.
- Choose your Brick size or type your own length, width, height and Mortar joint, and say which unit they are in.
- Check the Brick waste %, Mortar waste % and the bricks one bag lays, then read the totals under Result.
How many bricks do I need per square meter?
Each brick takes up its own size plus one mortar joint on the length and on the height, so the number of bricks on one face of a wall is 1 ÷ ((length + joint) × (height + joint)) per unit of area. For the common UK brick, 215 × 102.5 × 65 mm with a 10 mm joint, the face of one brick plus its joints is 225 × 75 mm, which is 0.016875 m², so a square meter of single-skin wall holds 1 ÷ 0.016875 = 59.3 bricks. A wall two bricks thick needs twice that, about 118.5.
In US units a modular brick, 7 5/8 × 3 5/8 × 2 1/4 inches with a 3/8 inch joint, occupies 8 × 2 5/8 inches, so 144 ÷ 21 = 6.86 bricks per square foot, or 686 per 100 square feet. The Brick Industry Association's table gives 675 per 100 square feet for modular brick because its modular layout lays three courses to 8 inches, which makes the bed joints slightly thicker than 3/8 inch. Type your real joint thickness and the tool follows it. Multiply the brickwork area (wall minus openings) by the bricks per unit of area and round up: the example wall, 30 ft by 8 ft with 36 square feet of openings, is 204 square feet, which is 1,399 bricks before waste.
How much mortar do I need per 1,000 bricks?
The mortar is the volume of the joints. For one brick it is its width times the difference between the area of brick plus joints and the area of the brick face alone: width × ((length + joint) × (height + joint) − length × height). For the UK brick that is 102.5 × (16,875 − 13,975) = 297,250 cubic millimeters, so 1,000 bricks need 0.297 cubic meters. For the US modular brick it works out at 8.06 cubic feet per 1,000, which agrees with the 8.1 cubic feet in the Brick Industry Association's quantity table.
Real jobs use more than the theory, because mortar falls, fills the frogs of the bricks and beds unevenly. The tool therefore adds a separate Mortar waste %, starting at 20%, inside the 15 to 25% the association gives as a general rule. Bags of mortar mix are counted from the number of bricks one bag lays. The starting figure of 37 is a manufacturer's "up to" value for an 80 lb bag and standard bricks, so treat it as a best case and use the figure on your own bag.
How much waste should I allow, and what is the difference between single and double skin?
Bricks break, and cut bricks at corners, openings and the top course leave offcuts. The Brick Industry Association's general rule is to add at least 5% to the net count, which is the tool's starting value; a wall with many corners or openings, or a hard-to-cut brick, may call for more. The count also ignores special shaped bricks, lintels and the bond pattern, so give your supplier the wall sizes and ask them to confirm the order.
A single skin is one brick wide, laid lengthwise (stretcher bond). A double skin is two bricks thick: the tool doubles the bricks and adds a mortar-filled joint between the two skins. Cavity walls, header bonds and walls built of bricks laid on their sides use a different count, so use the tool as a first estimate for those.
Use it with
- Square Footage Calculator: area of rooms and plots.
- Concrete Calculator: bags or cubic yards for slabs and posts.
- Gravel Calculator: gravel tons and volume.
Questions
How many bricks are in a square meter of wall?
About 59 for a single-skin wall of standard UK bricks (215 × 65 mm face) with 10 mm joints, and about 118 for a wall two bricks thick.
How many bricks per square foot?
About 6.9 for US modular brick with 3/8 inch joints, or 686 per 100 square feet. The Brick Industry Association lists 675 per 100 square feet for a modular 8 inch, three-course layout.
How much mortar do I need for 1,000 bricks?
About 0.30 cubic meters (8 cubic feet) for the joints with a 10 mm or 3/8 inch joint, before waste. The tool adds a waste allowance on top.
How many extra bricks should I order?
At least 5% is a common rule of thumb for breakage and cuts. The tool starts with 5% and you can type another figure.
Does it work for a wall with windows and doors?
Yes. Add up the width times the height of each opening, type the total in Openings, and it is taken off the wall area before the bricks are counted.
Can I use a brick that is not on the list?
Yes. Choose My own brick size or just edit the length, width, height and joint boxes, and pick millimeters, centimeters or inches.
Sources
How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.