Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Home and DIY

Drywall calculator

Type the room, take off the doors and windows, choose your sheet size and get the number of sheets to buy, plus an optional estimate of screws, joint compound and tape.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

Units
What are you boarding?
Every room, wall and opening length is in this unit. Changing it does not convert numbers you already typed.
Doors and windows to leave out
Sizes are examples: measure yours. Type 0 to leave none out. Openings only come off walls.
Extra covers cuts, damaged sheets and mistakes. 10 is a common starting point, not a rule. Sheet sizes differ by region and maker: type yours if it is not listed.
Screws, joint compound and tape (optional)
The starting figures are from National Gypsum's estimating table (1,250 screws, 9.0 gallons of compound and 350 ft of tape per 1,000 ft²; converted for metric). Use your maker's figures when you have them.
Result

15 sheets of 4 × 8 ft14.70 exactly · 470.53 ft² to cover with 10% extra · 480.00 ft² bought

  • 427.75 ft² of wall and ceiling
  • 10% extra
  • One sheet 32.00 ft²
  • 535 screws
Surfaceft²
Four walls: 2 × (12 + 10) × 8 ft352.00
Ceiling: 12 × 10 ft120.00
1 door: 1 × 3 × 6.75 ft-20.25
2 windows: 2 × 3 × 4 ft-24.00
Area to board427.75
Area, no extra
427.75 ft²
Area, with 10% extra
470.53 ft²
Sheets, exact
14.70
Sheets to buy
15
Screws
535
Joint compound
3.85 US gal (14.6 L)
Joint tape
150 ft
Sheet sizeSheetsBought, ft²
4 × 8 ft (1219 × 2438 mm)15480.00
4 × 10 ft (1219 × 3048 mm)12480.00
4 × 12 ft (1219 × 3658 mm)10480.00
1200 × 2400 mm16496.00

Formula: sheets = area × (1 + extra ÷ 100) ÷ area of one sheet, rounded up. Wall area of a room = 2 × (length + width) × height; ceiling = length × width; each door or window = width × height. Screws, joint compound and tape = the area × the rate per 1,000 ft², which are the figures in National Gypsum's estimating table unless you change them.

Your numbers: (2 × (12 + 10) × 8 + 12 × 10 − 1 × 3 × 6.75 − 2 × 3 × 4) = 427.75 ft²; × (1 + 10 ÷ 100) = 470.53 ft²; ÷ 32.00 ft² per sheet (4 × 8 ft) = 14.70, rounds up to 15.

This counts sheets by area. Seams, cut-offs, sheet direction and the room's layout can change the real count by a few sheets, so lay the rooms out on paper or ask your supplier. Screw, compound and tape figures are guides for ordinary finishing, not rules.

How to use the Drywall Calculator

  1. Pick US or Metric under Units, choose One room or Separate surfaces, and type the sizes. Tick Walls, Ceiling or both.
  2. Under Doors and windows to leave out, type the number and size of each. The sizes in the boxes are examples: measure yours.
  3. Choose the Sheet size (or type your own) and set the Extra % for cuts and mistakes.
  4. Keep Estimate them ticked for screws, joint compound and tape, then read the sheets and the size table under Result.

How many sheets of drywall do I need?

Find the area you need to cover, add a margin for cuts, and divide by the area of one sheet: sheets = area × (1 + extra ÷ 100) ÷ sheet area, rounded up to a whole sheet. A room 12 ft long, 10 ft wide and 8 ft high has four walls of 2 × (12 + 10) × 8 = 352 square feet. One door of 3 ft by 6.75 ft (20.25 square feet) and two windows of 3 ft by 4 ft (24 square feet) take 44.25 square feet off, which leaves 307.75 square feet of wall. A 4 ft by 8 ft sheet covers 32 square feet, so the walls alone are 307.75 ÷ 32 = 9.6 sheets before any extra.

You can type the room in feet, inches, yards, meters, centimeters or millimeters, and the sheet in feet, inches, meters or millimeters. If you would rather list the walls one by one, choose Separate surfaces and type each width and height. Door and window sizes in the boxes are only examples, so measure your own and set the count to 0 to leave nothing out.

How do I calculate drywall for a ceiling?

A ceiling is a rectangle, so its area is length × width. The same 12 ft by 10 ft room has a 120 square foot ceiling, and ticking Ceiling adds it to the walls: 352 + 120 − 44.25 = 427.75 square feet. Doors and windows only come off the walls, never the ceiling. Sloped or vaulted ceilings are easier in Separate surfaces: add one row for each flat plane and type its two sides. Ceiling sheets are heavy and are usually fixed with the long edge across the joists, so check the layout and the thickness your local rules or supplier recommend.

How much waste should I add, and what size sheet should I buy?

The Extra % box starts at 10, labelled as an example, because cut-offs, damaged edges and mistakes are common on small rooms with many openings. It is a convention, not a rule: a plain room with whole-sheet runs can need less, and a room with many corners, a stairwell or sloped ceilings can need more. With 10% extra the example room needs 470.5 square feet, which is 14.70 sheets of 4 ft by 8 ft, so 15 sheets.

The size table under the result shows the same room for every listed sheet: 15 sheets of 4 × 8 ft, 12 of 4 × 10 ft, 10 of 4 × 12 ft and 16 of 1200 × 2400 mm. Longer sheets mean fewer joints to finish, but they are heavier and harder to carry through doors and up stairs. Sheet sizes differ by region and maker, so the metric size is only one common example: choose My own sheet size and type the width and length of the sheets on sale near you. The count is by area, so seams and sheet direction can shift the real number by a sheet or two.

How many screws and how much joint compound per sheet?

The optional estimate uses the rates in National Gypsum's drywall estimating table, which lists for each 1,000 square feet of wall or ceiling 1,250 screws, 9.0 gallons of ready-mixed joint compound (123 to 140 pounds) and 350 feet of joint tape. For the example 427.75 square feet that is 535 screws, 3.85 US gallons (14.6 liters) of compound and about 150 feet of tape. Per 4 × 8 ft sheet, the same rates give about 40 screws and 0.29 gallons of compound. The rates are in editable boxes, and the metric starting values are the same figures converted per 100 square meters.

They are manufacturer guidance for ordinary finishing, not exact needs. Your fastener spacing, the compound type (setting or ready-mixed), the number of coats and your finishing skill all change the amounts, so use the figures on your product's label when you have them.

Use it with

Questions

How many sheets of drywall do I need for a room?

Divide the wall and ceiling area, plus about 10% extra, by the area of one sheet and round up. A 12 ft by 10 ft room, 8 ft high, with walls and ceiling and one door and two windows left out needs 15 sheets of 4 × 8 ft.

How do I calculate drywall for a ceiling?

Multiply the room length by its width and add that to the wall area. A 12 ft by 10 ft ceiling is 120 square feet, which is just under four 4 × 8 ft sheets.

How much waste should I add for drywall?

Many people allow about 10% for cuts and mistakes. It is a rule of thumb, so the tool lets you change it to what your supplier or installer recommends.

How many screws and how much joint compound per sheet?

At the rates in National Gypsum's estimating table (1,250 screws and 9.0 gallons of joint compound per 1,000 square feet), a 4 × 8 ft sheet takes about 40 screws and 0.29 gallons of compound. Check your own product's label.

What size drywall sheet should I buy?

It depends on what you can carry and how many joints you want to finish. Longer sheets such as 4 × 12 ft mean fewer joints but are heavier. The size table shows the count for each size.

Do I subtract doors and windows?

Yes, if you want the closest count. Type how many there are and their sizes; the tool takes them off the walls only. Set the counts to 0 to board over them.

How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.