Maaz Zindani

Loading the index…

↑↓ move↵ openesc close3993 pages

Free tool · Home and DIY

Paint calculator

Type the room or the walls, take off the doors and windows, set the coats and the coverage on your can, and get the paint in gallons or liters and the cans to buy.

  • Free
  • No sign-up
  • Runs in your browser

By Maaz Zindani · Updated

Units
What are you painting?
Every length below is in this unit. Changing it does not convert numbers you already typed.
Doors and windows to leave out
Door and window sizes are examples: measure yours. Type 0 doors or windows to leave none out.
Extra covers touch-ups, roller and tray loss. 10 is only a common starting point, not a rule.
Result

2 cans of 1 US gallon1.76 US gal (6.66 L) exactly for 2 coats, 1.93 US gal (7.32 L) with 10% extra

  • 307.75 ft² to paint
  • 2 coats
  • 350 ft² per US gallon
  • 10% extra
Surfaceft²
Four walls: 2 × (12 + 10) × 8 ft352.00
1 door: 1 × 3 × 6.75 ft-20.25
2 windows: 2 × 3 × 4 ft-24.00
Area to paint, one coat307.75
Area, all coats
615.50 ft²
Paint, exact
1.76 US gal (6.66 L)
Paint, with 10% extra
1.93 US gal (7.32 L)
Imperial gallons
1.61 imp gal
To buy
2 × 1 US gallon = 7.6 L
Can sizeCansBuy, LSpare, L
1 US quart87.60.25
1 US gallon27.60.25
5 US gallons118.911.60
1 L88.00.68
2.5 L37.50.18
4 L28.00.68
5 L210.02.68
10 L110.02.68
20 L120.012.68

Formula: paint = area to paint × coats ÷ coverage; with extra = paint × (1 + extra ÷ 100); cans = paint ÷ can size, rounded up. Wall area of a room = 2 × (length + width) × height; ceiling = length × width; each door or window = width × height.

Your numbers: (2 × (12 + 10) × 8 − 1 × 3 × 6.75 − 2 × 3 × 4) = 307.75 ft²; × 2 = 615.50 ft²; ÷ 350 ft² per US gallon = 1.76 US gal (6.66 L); × (1 + 10 ÷ 100) = 1.93 US gal (7.32 L); 1.93 cans of 1 US gallon rounds up to 2.

Coverage depends on the paint, the surface and how it is applied. Primer, bare plaster, new drywall, rough or textured walls and dark-to-light color changes all use more. Use the coverage printed on your can, and ask the shop about your surface.

How to use the Paint Calculator

  1. Pick US or Metric under Units, then choose One room (four walls) or Separate walls and type the sizes. Tick Paint the ceiling too if needed.
  2. Under Doors and windows to leave out, type how many there are and the size of each. These are examples: measure yours.
  3. Set Coats, Extra paint % and the Coverage of your paint printed on the can.
  4. Choose the Can size you will buy and read the cans, the exact amount and the can-size table under Result.

How much paint do I need for a room?

Start with the area of the walls. For a rectangular room, the four walls add up to 2 × (length + width) × height. A room 12 ft long, 10 ft wide and 8 ft high has 2 × (12 + 10) × 8 = 352 square feet of wall. If you would rather measure wall by wall, choose Separate walls and type each width and height; the same room as four walls (12 × 8, 10 × 8, 12 × 8 and 10 × 8) gives the same 352 square feet. Then divide the area by the coverage of one gallon or one liter of your paint.

The tool works in any length unit, so you can type inches, centimeters or millimeters in I measured in instead of converting by hand. It converts everything to square meters and liters internally and shows the answer in the units of the system you picked, with the other one beside it.

Do I subtract doors and windows?

Yes, if they are large enough to matter. Each door or window is width × height, and the tool takes the total off the wall area. In the example, one door 3 ft by 6.75 ft (20.25 ft²) and two windows 3 ft by 4 ft (24 ft²) remove 44.25 square feet, leaving 307.75 square feet to paint. The door and window sizes in the boxes are examples, so replace them with your own measurements. Some painters leave small windows and a single door in, to cover trim, cut-in work and the odd missed patch, and that is a fair choice: set the count to 0 and the tool will not deduct them.

The deduction only takes paint off walls. If the doors and windows you type are larger than the walls, the tool tells you so instead of showing a negative area.

How much paint do I need for two coats, and what coverage should I use?

Each coat covers the whole area again, so the paint is area × coats ÷ coverage. With 307.75 square feet, two coats are 615.5 square feet, and at 350 square feet per gallon that is 1.76 gallons, or 6.66 liters. The coverage figure is the one to take from your own can or data sheet, because it differs between products. As a guide to the scale, Sherwin-Williams says a gallon of paint typically covers about 350 to 400 square feet and that textured walls may need a little more than a gallon on hand. The box starts at 350, marked as an example, and you can change it to the figure printed on your can in square feet per US gallon or square meters per liter (350 ft² per gallon is about 8.6 m² per liter).

Bare plaster, new drywall, rough or textured surfaces and strong color changes soak up more paint, and a primer coat is a separate quantity of primer. Treat the result as an estimate for a normal repaint and ask the shop about your surface.

How do I paint a ceiling, and how many cans should I buy?

A ceiling is length × width: tick Paint the ceiling too and the 12 ft by 10 ft room adds 120 square feet, taking the total to 427.75 square feet. In separate-wall mode, add a row and type the two sides of the ceiling. The Extra paint % box adds a margin for touch-ups, roller and tray loss, and it starts at 10 as an example, not a rule. The example room needs 1.76 gallons exactly and 1.93 gallons with 10% extra, so it rounds up to two 1-gallon cans.

You can only buy whole cans, so the answer rounds up and the table under the result shows every can size: the number of cans, how much paint you will actually buy and what is left over. A US gallon is 3.785 liters and an imperial gallon is 4.546 liters, so the tool names the gallon it means. Keep a little paint from the batch for later touch-ups: different batches of the same color can differ slightly.

Use it with

Questions

How do I calculate how much paint I need?

Find the wall area, take off doors and windows, multiply by the number of coats and divide by the coverage on the can. For a 12 ft by 10 ft room, 8 ft high, with two coats, that is about 1.76 US gallons before any extra.

How much paint do I need for a 12 x 10 room?

With 8 ft walls, one door and two windows left out, two coats need about 1.76 gallons (6.66 liters), or 1.93 gallons with 10% extra, so two 1-gallon cans. The ceiling adds about 0.34 gallons for two coats.

How many square feet does a gallon of paint cover?

Sherwin-Williams says about 350 to 400 square feet. Your can states its own figure, so type that into the coverage box.

Do I need to subtract doors and windows?

It is optional but accurate. Type how many and their sizes and the tool subtracts them from the wall area. Set the count to 0 if you would rather paint them in.

Is a US gallon the same as an imperial gallon?

No. A US gallon is 3.785 liters and an imperial gallon is 4.546 liters. The tool works in liters inside and shows both.

Does this include primer?

No. Primer, bare or textured surfaces and big color changes use more paint than a normal repaint. Calculate primer on its own with its own coverage.

How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.