Free tool · Home and DIY
Pool volume calculator
Choose the pool shape, type its size and its shallow and deep depths, and get the volume in US gallons, imperial gallons, liters and cubic meters, plus the time to fill it.
- Free
- No sign-up
- Runs in your browser
22,023 US gallons83,365 liters · 18,338 imperial gallons · 83.36 m³
- Rectangle
- 512.00 ft² surface
- 5.75 ft average depth
- Fills in 1 d 12 h
- US gallons
- 22,022.6
- Imperial gallons
- 18,337.7
- Liters
- 83,365
- Cubic meters
- 83.365
- Cubic feet
- 2,944.0
- Surface area
- 512.00 ft²
- Average depth
- 5.75 ft
- Time to fill at 10 US gal/min
- 1 d 12 h
Formula: volume = surface area × average depth. area = length × width. Average depth of a sloping floor = (shallow + deep) ÷ 2, which is exact only for an even slope; flat parts are weighted by their length. 1 US gallon = 3.785 liters, 1 imperial gallon = 4.546 liters, 1 ft³ = 28.317 liters.
Your numbers: area 32 × 16 ft = 512.00 ft²; average depth (3.5 + 8) ÷ 2 = 5.75 ft; 512.00 ft² × 5.75 ft = 83.365 m³ = 83,365 liters = 22,022.6 US gallons = 18,337.7 imperial gallons.
Use the water depth, not the wall height, because a pool is not filled to the top. Steps, benches, rounded corners and a curved floor change the real volume, so treat the result as an estimate. It gives the volume only: for chemical amounts follow the product label or your local health authority.
How to use the Pool Volume Calculator
- Pick US or Metric under Units, then choose the Pool shape and type its sizes.
- Under Water depth, choose Shallow end and deep end and type both depths, or Same depth everywhere.
- If part of the floor is flat, type that length in Flat part at the shallow end or Flat part at the deep end.
- Type a Fill rate to see how long filling takes, then read the volume under Result.
How do I calculate the volume of my pool in gallons?
The volume of a pool is its surface area multiplied by its average water depth. For a rectangular pool 32 ft long and 16 ft wide the area is 32 × 16 = 512 square feet. If the water is 3.5 ft deep at one end and 8 ft deep at the other, the average depth is (3.5 + 8) ÷ 2 = 5.75 ft, so the volume is 512 × 5.75 = 2,944 cubic feet. One cubic foot holds about 7.48 US gallons, so that pool holds about 22,023 US gallons. In metric, a pool 10 m by 5 m with depths of 1 m and 2 m has an average depth of 1.5 m and a volume of 10 × 5 × 1.5 = 75 cubic meters, which is 75,000 liters.
Measure the depth of the water, not the height of the wall, because a pool is not filled to the brim. The tool rounds the headline figure to a whole gallon or liter and shows the exact figure in the boxes below it.
How do I calculate an oval, round or kidney pool?
Only the area changes. A round pool has an area of π × (diameter ÷ 2)², so a pool 24 ft across covers 452.4 square feet. An oval pool is treated as an ellipse, π ÷ 4 × length × width, which is 353.4 square feet for a pool 30 ft by 15 ft. A real oval pool with straight sides holds a little more than an ellipse, so it is an approximation.
A kidney pool has no exact formula, so the tool uses the rule of thumb area ≈ factor × (width A + width B) × length, with the factor starting at 0.45 as an example. A kidney pool 30 ft long and 15 ft and 10 ft wide at the two ends comes to 0.45 × 25 × 30 = 337.5 square feet. The factor is an editable box and the result is labelled approximate: for a better figure, divide the pool into shapes you can measure.
How do I handle a pool with a shallow end and a deep end?
If the floor slopes evenly from the shallow end to the deep end, the average depth is simply the shallow depth plus the deep depth, divided by two. Many pools are not like that: they have a flat shallow part, a slope and a flat deep part. For those, type the length of the flat part at either end and the tool weights each part by its length. With the 32 ft example, a 12 ft flat shallow part at 3.5 ft followed by a slope to 8 ft over the other 20 ft gives an average depth of (12 × 3.5 + 20 × 5.75) ÷ 32 = 4.9 ft, which is about 18,791 US gallons.
The same idea applies to round, oval and kidney pools, but there the flat parts are only an approximation, because the width changes along the length. Steps, benches and a curved floor also take volume away, so treat the answer as an estimate.
How many liters is that, and how long will it take to fill?
The tool works in cubic meters and converts exactly. NIST's conversion table lists the US gallon as 3.785412 liters (a US gallon is 231 cubic inches), the imperial gallon as exactly 4.54609 liters and the cubic foot as 28.317 liters. The example pool is 83,365 liters, 22,023 US gallons or 18,338 imperial gallons. A cubic meter is 1,000 liters.
To see how long filling takes, type the rate your hose or pump delivers. Time a bucket of known size under the hose to find it rather than guessing: at 10 US gallons a minute, the example pool takes about 1 day and 12 hours. The tool gives the volume only. For chemical amounts, follow the product label or your local health authority.
Use it with
- Concrete Calculator: bags or cubic yards for slabs and posts.
- Square Footage Calculator: area of rooms and plots.
- Gravel Calculator: gravel tons and volume.
Questions
How do I calculate the volume of my pool in gallons?
Multiply the surface area by the average water depth in feet to get cubic feet, then multiply by 7.48 for US gallons. A 32 ft by 16 ft pool averaging 5.75 ft deep holds 2,944 ft³, about 22,023 US gallons.
How do I calculate an oval or round pool?
For a round pool the area is π × (diameter ÷ 2)². For an oval, treat it as an ellipse, π ÷ 4 × length × width, and multiply the area by the average depth.
How do I handle a pool with a shallow and a deep end?
Use the average depth: (shallow + deep) ÷ 2 for an even slope. If part of the floor is flat, type its length and the tool weights the depths by length.
How many liters is a US gallon, and an imperial gallon?
A US gallon is 3.785 liters and an imperial gallon is 4.546 liters. The tool shows the pool in both, plus cubic meters, where 1 m³ is 1,000 liters.
How long will it take to fill my pool?
Divide the volume by the flow rate. Time a bucket under your hose to find the rate, type it in, and the tool gives the time. At 10 US gallons a minute, 22,023 gallons takes about 1 day and 12 hours.
How accurate is the kidney pool figure?
It is an approximation using an editable shape factor of 0.45. Rounded corners, steps and curved floors change the real volume, so measure a few widths and treat the answer as an estimate.
Sources
How this page was made: the tool's results are computed in your browser by the code on this page, using the sources listed above; the explanations were drafted with AI help and checked against the tool's own output.